[The use of ion chromatography for the determination of volatile inorganic acids in workplace air]. / Zastosowanie chromatografii jonowej do oznaczania lotnych kwasów nieorganicznych w powietrzu na stanowiskach pracy.

BACKGROUND: The presence of inorganic acids in the air poses a threat to the health of workers. Volatile inorganic acids, e.g., hydrochloric acid, hydrobromic acid and nitric acid, may cause respiratory, eye and skin irritation. The presented method uses ion chromatography to determine the concentrations of hydrochloric, hydrobromic and nitric acids in air samples. MATERIAL AND METHODS: The method is based on the collection of airborne volatile acids on impregnated quartz fiber filter, extraction of acids with deionized water, and analysis by ion chromatography with conductivity suppression. The separation was performed on the Dionex IonPac™ AS22 (4 × 250 mm) column for trace anion analysis. The carbonate/bicarbonate eluent was maintained at an isocratic flow rate of 1.2 ml/min. The calibration standard solutions have been covering the range of 0.2-5 mg/l of chloride, bromide and nitrate. RESULTS: The specified chromatographic conditions enable selective measurement of chloride, bromide and nitrate anions. The obtained mass concentration of each anion, having factored in the sample dilution, the conversion factor (to convert anion concentration to acid) and the volume of the air sample, allows the calculation of acid concentrations in the analyzed air. CONCLUSIONS: This method makes it possible to determine the concentration of hydrochloric acid, hydrobromic acid and nitric acid in the workplace air within the concentration range corresponding to 0.1-2 times the exposure limit value in Poland. The method meets the criteria for the performance of procedures for the measurement of chemical agents, listed in PN-EN 482. This article discusses the problems of occupational safety and health, which are covered by health sciences and environmental engineering. Med Pr. 2022;73(4):337-47.

Identification of most preferable reaction pathways for chloride depletion from size segregated sea-salt aerosols: A study over high altitude Himalaya, tropical urban metropolis and tropical coastal mangrove forest in eastern India.

Depletion of chloride from sea-salt aerosols affects their hygroscopicity, cloud condensation nuclei activity as well as microphysical and chemical properties of aerosols and clouds modifying earth-atmosphere radiative balance. Here, we proposed five possible reaction pathways through which the inorganic acids (H2SO4 and HNO3) could deplete chloride from sea-salt aerosols. We determined "maximum potential contribution" (MPC) of each acid and compared the MPC with actual chloride depletion. This step-by-step approach enables us to identify the most preferable reaction pathway(s) for coarse, superfine, accumulation and ultrafine aerosols over a Himalayan station (Darjeeling), a tropical urban station (Kolkata) and a tropical mangrove forest at the north-east coast of Bay of Bengal (Sundarban) in India. Over Kolkata and Darjeeling, locally generated acids reacted with transported sea-salts. Over Sundarban, the locally generated sea-salts from the Bay of Bengal reacted with the acids of biomass burning plume transported from Eastern Ghat and continental haze transported from upper Indo-Gangetic Plain. The average chloride depletion in PM10 ranged between 70 and 74% over Sundarban and 31-34% over Kolkata and Darjeeling. We observed that HNO3(g) depleted the larger (>1 µm) chlorides whereas H2SO4(g) depleted the smaller (<1 µm) chlorides over Kolkata and Darjeeling. However, in addition to H2SO4(g) and HNO3(g), some other species could be involved in chloride depletion over Sundarban mainly during winter. The study reveals that Sundarban acts as the major sink of the inorganic acids transported from Eastern Ghat biomass burning plume inhibiting their further advection towards inland regions.

Piezoelectric Micro-dosing System for Spiking Quality Samples in Occupational Hygiene Laboratories.

Quality control is crucially important in the arena of chemical analysis. Reference materials are essential for calibration and quality control processes, and for verification of the accuracy and reliability of the analytical results obtained. Owing to the complexity of their manufacture, reference materials for chemical agents occurring at workplaces are expensive and available only on a limited scale and for a small number of substances. Therefore, their cost-effective and fast production is an important aim. The Institute for Occupational Health and Safety (IFA) of the German Social Accident Insurance (DGUV) currently pursues different strategies for the production of reference materials. One strategy entails the use of a piezoelectric micro-dispensing system for non-contact spiking of extremely small quantities of substances with high reproducibility. The dispensing system is coupled to a semi-automated assembly unit for loading high numbers of samples. It is used for spiking phosphoric and sulphuric acid onto quartz fibre filters. Comparison of the results obtained on different days shows higher variability than results observed on the same day. However, after daily adjustment of the number of droplets to the current droplet volume, highly reproducible series with an adequate number of samples (>500) could be realized. The results of the internal quality control were verified in an interlaboratory comparison. Furthermore, storage stability was investigated systematically over a period of 2 years. The samples produced are suitable for use as reference materials for both inorganic acids.

Assessment of morphological changes and DNA quantification: An in vitro study on acid-immersed teeth.

CONTEXT: Acid immersion of victim's body is one of the methods employed to subvert identification of the victim, and hence of the perpetrator. Being hardest and chemically the most stable tissue in the body, teeth can be an important forensic investigative medium in both living and nonliving populations. Teeth are also good reservoirs of both cellular and mitochondrial DNA; however, the quality and quantity of DNA obtained varies according to the environment the tooth has been subjected to. DNA extraction from acid-treated teeth has seldom been reported. AIMS: The objectives of the present study were to assess the morphological changes along with DNA recovery from acid-immersed teeth. MATERIALS AND METHODS: Concentrated hydrochloric acid, nitric acid, and sulfuric acid were employed for tooth decalcification. DNA was extracted on an hourly basis using phenol-chloroform method. Quantification of extracted DNA was done using a spectrophotometer. RESULTS: Results showed that hydrochloric acid had more destructive capacity compared to other acids. CONCLUSION: Sufficient quantity of DNA was obtainable till the first 2 hours of acid immersion and there was an inverse proportional relation between mean absorbance ratio and quantity of obtained DNA on an hourly basis.

Occupational exposure to acid mists and periodontal attachment loss / Exposição ocupacional a névoas ácidas e perda de inserção periodontal

This study investigated the hypotheses that occupational exposure to acid mists is positively associated with periodontal disease, assessed by periodontal attachment loss. The study sample included 530 male workers at a metal processing factory. Data were obtained from interviews and oral examinations. Periodontal attachment loss was defined as > 4mm at probing, in at least one tooth. A job exposure matrix was utilized for exposure evaluation. Exposure to acid mists was positively associated with periodontal attachment loss > 4mm at any time (prevalence ratio, PRadjusted = 2.17), past (PRadjusted = 2.11), and over 6 years of exposure (PRadjusted = 1.77), independently of age, alcohol consumption, and smoking, and these results were limited to workers who did not use dental floss. Exposure to acid mists is a potential risk factor for periodontal attachment loss, and further studies are needed, using longitudinal designs and more accurate exposure measures.

Este estudo investigou a hipótese de que a exposição ocupacional a névoas ácidas está associada positivamente à doença periodontal, avaliada através da perda de inserção periodontal. O estudo foi conduzido com 530 trabalhadores do sexo masculino de uma metalúrgica. Os dados foram obtidos por meio de entrevistas individuais e de exames clínicos odontológicos. A perda de inserção periodontal foi avaliada durante a sondagem e definida em > 4mm, em pelo menos um dente. Uma matriz de exposição ocupacional foi utilizada para avaliação da exposição. A exposição a névoas ácidas foi associada positivamente à perda de inserção periodontal > 4mm para a ocorrência da exposição em algum momento (RPajustada = 2,17), exposição passada (RPajustada = 2,11) e duração da exposição maior que seis anos (RPajustada = 1,77), independentemente da idade, consumo de álcool e tabagismo; estes resultados foram observados apenas entre os trabalhadores que não usavam o fio dental. A exposição a névoas ácidas é um fator de risco potencial para a perda de inserção periodontal e são necessários outros estudos que utilizem desenhos longitudinais e medidas de exposição mais acuradas.